Target Corona Vision - Wall mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I required a better mount for my Target Corona Vision lightring, so I created a mount
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 17
- Makes
- 0
- Views
- 68
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I required a better mount for my Target Corona Vision light ring, so I created a wall mount fits my Winmau cabinet. Now I can easy remove the light ring and close the cabinet when not in use also.
The dartboard itself can be rotated without the mount moving. This makes it easier to rotate the board when worn and decreases vibrations to the cameras while throwing.
The only change I made to my original light ring legs is that I drilled a 3mm hole to be able to put a pin in the top ones so it never risks slipping out of the bracket. How? Just put the leg into the wallmount and drill through the existing hole. It won't touch the magnet.