IKEA LEKMAN box clone for KALLAX/EXPEDIT
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
LEKMAN clone, which was THE best box for KALLAX shelves imo
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 36
- Makes
- 0
- Views
- 473
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
IKEA doesn't sell the LEKMAN boxes anymore :( which were THE best boxes for the KALLAX shelves!
So I made my own.
As the original is 33x33x37 (WxHxD) cm and this is too large for the Prusa XL, I stripped off 1cm from the longest side (depth).
There are multiple files with different wall thicknesses.
I printed my box with the 5mm version on a Prusa XL, took about 2days and ~1.5kg of PETG. Unfortunately my first attempt cracked on one corner at the point in the print where the spool needed changing, since it sat on paused state for multiple hours :/ But it's still usable. Gotta do a second attempt at some point...
The only printers that I know of which are large enough for this model are:
Prusa XL
Elegoo Neptune 4 Max
Anycubic Kobra 3 Max
Sovol SV08 Max
Elegoo OrangeStorm Giga (well, that beast can even do 4 boxes on one sheet 😂)
There are some 35x35x? cm printers out there (e.g. Sovol SV08), those could maybe do a slightly scaled down version.
Bambu Lab H2 line's build volume is too small.