Sensory Cube
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small cube with different textures
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 34
- Makes
- 0
- Views
- 133
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple cube with different textures on each face. I tested out various tools in my 3D sculpting software and ended up with this. The bottom is left flat to be easy to print, but bridging towards the top may be an issue. Make sure your printer has good enough cooling to handle it without problem. The cube can be used as a children's building block as well as a sensory development tool, but if you are going to give this to young children, please print this in a nontoxic polymer like PLA or TPU. I have noticed that the textures are very subtle at current scaling, so I would advise scaling the cube up to 125% or 150%.
If you want to print this in TPU, make sure you set the top layers to 4-5 or make sure you have enough infill to support the top. I've noticed that the top layers like to sag into the print and create pits.