Condom dispenser
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€7.08 – €8.65 net (excluding VAT)
For file: condom dispenser_0.4n_0.2mm_PLA_MK4S_3h48m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €7.86 excluding VAT (range midpoint).
- Weight reported by the author
- 183 g
- Print time reported by the author
- 3.81 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Simple condom dispenser, to be attached to the wall or placed on a table.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 17
- Makes
- 0
- Views
- 125
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Manufacturing instructions
Material: PLA or PETG
3D Printer: Any FDM 3D printer
Slicer settings: 4 perimeters to increase strength, no supports
Post processing instructions: Clean the parts from stringing if needed, check if the parts slides into each other as per assembly instructions.
Assembling instructions
Insert the bottom part into main body so that the openings in both parts are on the same side. You might need to use a bit strength to push parts together fully.
Insert the lid on top.
Hang on the wall.
QC procedures
Visual inspection:
Ensure that the surface is smooth.
Check if the parts are not deformed after print.
Tolerance inspection:
When assembling Bottom and Main body parts should slide into each other firmly.
Lid should slide easily and be easily removable.