Han Solo Book Nook

It measures approximately 11x10x21cm.

You can add a weight in the niche in the back ensuring the piece remains balanced and upright.

.3mf profiles for Prusa Slicer and Bambu Studio

Orientation & Stability

The Han face: is oriented facing up and prints with variable layer height and the setting “adaptive” enabled.

The mounting box: is oriented on its edge to optimize surface finish and reduce filament waste due to overhangs.

*Supports: Organic "paint-on" supports are pre-configured on the slanting side for stability.

*Adhesion (Crucial): Due to the long, narrow footprint and 3-wall thickness, internal tension can cause the part to lift around layer 30 (~6mm).

The Fix: While brims were insufficient in testing, a 3-layer Raft solved the issue perfectly. This profile uses a raft to maximize success with minimal filament impact.

Alternative Option: If you still experience lifting, consider printing the box standing flat on its bottom (included in .3mf file). This will require more supports for the overhangs but provides a larger footprint.

Note on Warping

If you choose to slice this yourself: be aware that the mass of 3+ walls on a narrow base creates significant shrinkage force as the PLA cools. I highly recommend sticking with the (3-layer) raft settings provided in the 3.mf to prevent the ends from overpowering the bed adhesion.

Description / Disclaimer

Fan Art Tribute: This table clock is a fan-made design inspired by Han Solo from the Star Wars universe.

Intellectual Property: All rights to Han Solo and Star Wars trademarks belong to Lucasfilm Ltd. / Disney. This model is not an official product and is not endorsed by the copyright holders.

Non-Commercial Use: This 3D model is provided for personal, non-commercial use only. I do not authorize the sale of this digital file or any physical prints of this design on any platform.

License: This work is shared under Standard Digital file license.

[pssst!] my Instagram might be worth a look: (@makers_designjournal) - swing by to see what I've been up to lately. I post most of my projects there. https://www.instagram.com/makers_designjournal/

Please kindly take a moment to show your support by giving this a LIKE! If you download this it would be really cool to see photos of your make(s). =D

3D Designed with: Fusion 360

All objects are designed by me!

THIS 3D OBJECT HAS BEEN PRINTED AND TESTED

If you have any questions, concerns as well as suggestions for improvements regarding this model please do not hesitate to contact me.

If you managed to read this far - yeah for you! 💪

Once Again: please kindly take a moment to show your support by giving this a LIKE. If so: thank you so much for your support and I hope you enjoy it. 🙏 This support is truly appreciated and will greatly help me in my future endeavors! 😊