1 / 5
Ground Spike Holder for POTA33H Mast — image 1
1 / 5

Ground Spike Holder for POTA33H Mast

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is an accessory holder for the Gigaparts POTA33H mast. The 3/8 inch ground rod is stored in this tube.

Rating
0 / 5
Likes
0
Downloads
6
Makes
0
Views
52
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

This is an accessory holder for the Gigaparts POTA33H mast. The 3/8 inch ground rod that is used to anchor the base of the POTA33H does not have a storage location so I designed these tubes that strap to the outside of the POTA33H. This should also work with just about any collapsible mast. They were designed for use with either the long or the short "3/8 Inch Thread Stainless Steel Camera Accessories Tripod Ground Spike" found on Amazon https://www.amazon.com/dp/B09VBLV291?th= 

I also used M3 x 4 mm screws to attach fishing leaders to the top and side of the tube to prevent the cap from being lost. You will notice a small hole in the bottom of the tube and this is to prevent the spike being vacuum locked or slowed to remove. Simple zip ties are used to hold the tube to the POTA33H.

Tags