1 / 4
EGO POWER+ 10" Telescopic Pole Saw (PS1000/1001, EP1000) Clamp-on Caddie — image 1
1 / 4

EGO POWER+ 10" Telescopic Pole Saw (PS1000/1001, EP1000) Clamp-on Caddie

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Pole saw accessory clamps designed for easier transport of an EGO POWER+ PS1000 pole saw and two extension poles.

Rating
0 / 5
Likes
1
Downloads
9
Makes
0
Views
160
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — NoDerivatives

Print in place (no hardware needed) clip-on pole saw pole accessory clamps are designed for easier transport of an EGO POWER+ PS1000 pole saw and two accessory 3.3' Carbon Fiber Extension poles between trucks, storage, and job sites. The clamps can be left on the saw while it is in use, or quickly removed.

Two of the identical pole holders are required for correct use. Attach both with the chamfer facing away from the battery holder grip. Poles are inserted through the front handle toward the grip as shown.

Note: Carefully flex the hinge joints to loosen them after printing. The clamp will creek a little when locking down, but has held up for me during its initial use. My tests used a PETG-CF filament. I do recommend a tough, chemical and UV resistant material.

Tags