NexGen3D: Creality K2 - K2 Pro - K2 Plus Extruder Couple Fix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple brace to mount an M10 4mm PTFE Tube Couple
- Rating
- 0 / 5
- Likes
- 39
- Downloads
- 157
- Makes
- 0
- Views
- 918
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
After buying K2 Pro and finding out that there is a ridiculous amount of stress placed on the stock couple being applied by the filament buffer and the CFS, I decided to fix the problem properly.
I found someone had already started this fix, so I leveraged their work and added strength, made it lighter and optimised it for printing without supports.
Please print in this orientation:

BOM:
2 x M2 Threaded Inserts
2 x M2 x 15mm Bolts
1 x M3 x 30mm Bolt
1 x M3 x 40mm Bolt
1 x 10mm PTFE Couple
Print from ABS or ABS-CF/GF for best results, I also cut the cover a little so it can be re-fitted, this is not really needed, but I like the look of it, so I trimmed it a little with a Dremel tool.