Remix of Hex2000's Ball Clock - Minutes 4 Balance Bar
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Rebalanced top minutes bar for Hex2000's Ball Clock
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 21
- Makes
- 0
- Views
- 73
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Tested with 10mm steel ball bearings (~4g each, 20-pack from Amazon). The printed bar weighs approximately 11g in PLA. With the original pocket position (~87mm from pivot), the counterweight overpowers the 5-ball side and the bar won't tip. Moving the pocket to ~62mm from pivot restores proper balance — the bar holds steady with 4 balls and tips reliably on the 5th.
If your bar isn't tipping correctly, this is likely your fix. Your results may vary slightly depending on ball weight and print density.
How this remix was made
This modification was designed and executed entirely by Claude (Anthropic's AI assistant) running in Claude Code (CLI), with no manual CAD editing. Here's the process:
Mesh Analysis
Using Python with trimesh and numpy, the original STL was loaded and analyzed programmatically. The bounding box, vertex positions, and face normals were examined to map every feature on the bar — the pivot slit, the counterweight pocket, and the multi-ball track.
The counterweight pocket was profiled at multiple Z heights to confirm it was a perfect spherical depression (radius 5mm, ~10mm opening at the top surface).
Physics Calculation
A torque balance analysis was performed using the measured values:
Ball weight: 4.05g each (81g per 20-pack of 10mm steel bearings from Amazon)
Bar weight: 11g (PLA)
Bar center of mass: calculated from mesh volume, ~5.6mm left of pivot
Original counterweight distance: ~87mm from pivot slit
The first 4 balls on the 5-ball side are roughly symmetric around the pivot (net torque ≈ 0). Only the 5th ball at ~23mm from pivot creates the tipping force. With the counterweight at 87mm, its torque far exceeds what 5 balls can produce, confirming the design imbalance. Physical testing confirmed that moving the counterweight ~1 inch closer to the pivot corrected the behavior.
Mesh Modification
The pocket was moved using boolean operations via manifold3d (a geometry processing library):
A cylinder was unioned with the bar to fill the original pocket
The result was intersected with the bar's bounding box to keep the top surface flat
A sphere (R=5mm) was subtracted at the new position to cut the relocated pocket
The non-manifold edge in the original STL (Error 3 in most slicers) was also repaired in the process.
Tools Used
Claude Code (Opus 4.6) — AI assistant driving the entire workflow
Python 3 with trimesh, numpy, scipy, networkx, manifold3d
No GUI CAD software was used at any point
