Enterprise 128/64 floppy drive chassis for pear's EXDOS card

I made a simple chassis for pear's EXDOS clone card to attach a floppy drive easily for this old bastard. To assemble, you need the following (or similar) pieces. I am sorry for the Hungarian links, but that's what was easily accessible for me:

- https://www.hestore.hu/prod_10020123.html?lang=en : RED/GREEN LED
- https://www.hestore.hu/prod_10022549.html?lang=en : LED socket
- https://www.hestore.hu/prod_10024073.html?lang=en : 3-pin connector for the LED cable
- https://www.hestore.hu/prod_10024120.html?lang=en : pins for the LED connector
- https://www.hestore.hu/prod_10042395.html?lang=en : M3 heat set inserts
- https://www.hestore.hu/prod_10026335.html?lang=en : 90-degree 34-pin male connector
- https://www.hestore.hu/prod_10026304.html?lang=en : 34-pin female connector
- https://www.hestore.hu/prod_10025052.html?lang=en : 34-pin cable
- https://www.hestore.hu/prod_10026588.html?lang=en : 4-pin ZZS35-O connector (floppy)
- https://www.hestore.hu/prod_10026587.html?lang=en : pins for the 4-pin ZZS35-O connector (floppy)
- https://www.hestore.hu/prod_10024082.html?lang=en : 4-pin socket for the floppy power cable
- https://www.hestore.hu/prod_10024085.html?lang=en : 4-pin connector for the floppy power cable
- https://www.hestore.hu/prod_10024121.html?lang=en : pins for the floppy power connector
- https://www.hestore.hu/prod_10032498.html?lang=en : Power switch
- https://www.hestore.hu/prod_10043133.html?lang=en : Standoffs to mount the drive to the PCB and the chassis
- https://www.hestore.hu/prod_10038660.html?lang=en : DC Jack power connector
- https://www.tme.eu/hu/en/details/lst1095/solder-terminals-pcb-mount/ninigi/ : socket for the power switch and cable
- https://www.tme.eu/hu/en/details/st-011_r/insulated-terminals/ninigi/ : red coloured connector for the power socket
- https://www.tme.eu/hu/en/details/st-011_b/insulated-terminals/ninigi/ : blue coloured connector for the power socket
- https://www.tme.eu/hu/en/details/st-001_r/insulated-terminals/ninigi/ : alternate red coloured connector for the power socket

Moreover, you need a bunch of M3 screws and some soft or rubber material which can be stuck to the adjustable legs (I got mine from the LIDL). For a more permanent installation, you can simply solder all the wires from the connectors (LED, power switch, power socket, floppy power) directly to the board. 

Last but not least, you need a floppy drive and pear's EXDOS card: https://wiki.enterpriseforever.com/index.php?title=EXDOS_by_pear