silly sledge + ejection
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
sledgefire modification to fire silly shells along with having an ejection mechanism!
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 35
- Makes
- 3
- Views
- 271
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
hw required
hw rn: m3 square nut x1 (5.3x5.3 thinner better)
m3 hex nut x5
m3x16 x1 (for the lever hinge bit)
m3x30 x3 (bottom lever hinge bit)
m3x25 x2 (top catch bit)
016 oringx1 (breech seal)
m3x20 x1 (sled ejector)
2-3mm elastic for ejection (same as sillypilot)
bit of double sided tape or epoxy or glue for the seal
you need 4 of anything from m3x35 to m3x20
(optional) upgrad main spring with 2 x22x 100mm spring
feel free to modify the files to make it hw free etc... replacing screws with pins shouldnt be the worst though having the frontend still be adjustable might be a small issue
check out the step file for assembly :)