Under-Desk 3.5" HDD Bracket — Dual Piece, Adjustable Spacing, No Supports
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A clean two-piece under-desk mount for a single 3.5" HDD
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 11
- Makes
- 0
- Views
- 74
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
This under-desk bracket holds a single 3.5" HDD out of sight and well-ventilated, with zero cable stress and a dead-simple install. The design is two identical halves — print the same file twice.
Design highlights:
Two identical halves — only one file to print, twice
Adjustable spacing — set the gap between brackets during installation to match any desk thickness
Up to 8 mounting screws — 4 tapered holes per bracket for rock-solid attachment
Fully open airflow — the open dual-bracket geometry passively ventilates the drive with no fans
Retention lip — keeps the drive seated without touching the port area
Printed in ASA — heat and UV resistant, built to last in an enclosed desk environment
Print settings used:
Material: ASA
Supports: None
Brim: 5mm outer
Quantity: Print ×2
Compatible with all standard 3.5" HDDs. Cable exits freely from the front without strain. Works with both Micro-B and USB-C drive enclosures.