Modified Roller For Polydryer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement "roller" for Polydryer box. Fixed issue with some cardboard spools pulling themselves forward and jamming
- Rating
- 4 / 5
- Likes
- 4
- Downloads
- 14
- Makes
- 1
- Views
- 153
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- GNU General Public License v3.0
Replacement "roller" for Polydryer box. Fixed issue I had with some cardboard spools pulling themselves forward and jamming against the front of the box. Requires 3 80mm lengths of 4mm OD PTFE tube.
Should be printed with a material that can withstand the heat of drying. Print with the highest temp material you plan to dry with the box.
Alternate might be less likely to rub on the printed plastic in edge cases, but I don't think it'll make much of a difference and I thought it was uglier.
Inspired by some other spool holders I've seen that use PTFE tubes instead of rollers.
https://cad.onshape.com/documents/5171f49bc26b377f7cadd467/w/17435960bdf8d679b0d5e735/e/752053dfd93723595baf018a?renderMode=0&uiState=69b3b481360424d5fef4aafb