AGM G3 Pro boom arm or camera mount phone holder

This is a rework of a design credit to the original creator Ayu and using part of Sneaks articulated camera mount , I took the model and made some changes to better suit this AGM G3 Pro beast of a phone that is quite thick and heavy , then i made some more changes then some more changes sometimes you just get lost in the creative process for hours , there is still a little of the original model but i have reworked and improved a few parts and completely redesigned the attachment to the boom arm with parts from Sneaks design, I've included Sneaks original screw and nut for convenance of the build.

Does not need supports for anything (for me)
while if your bridging isn't great perhaps supports on the clamps printed with the threads pointing up off the bed, check your slicer bridging layer on the clamps and bridging angle .

Printed in PETG on Prusa mk2.5S with .4 nozzle at .2 layer height , infill Gyroid  , for the mounts i used 40% infill to make them a bit stronger , but other parts 20%-30% is fine. 

Let me know if you have any other changes you think i should make, I'm still playing with ideas might make that mount point round instead of square so it can swivel the angle as once , going to see if it needs it first in testing at the moment..

VERSIONS:
11.09.26 V4b nut - larger diameter with a knurl grip.
11.09.26 V5 nut - little less diameter then the version V4 with a wider knurl grip.
11.09.26 V5 Cammount Frame - another version Frame for camera thread mounts using a 1/4"-20 UNC nut.

Leave comments , likes .. what ever be nice if some of you downloaders actually said something ..

Enjoy.