1 / 2
Voronoi krmítko pro ptáky – vajíčko / Voronoi Egg Bird Feeder — image 1
1 / 2

Voronoi krmítko pro ptáky – vajíčko / Voronoi Egg Bird Feeder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Krmítko pro ptáky ve tvaru vejce / Organically shaped egg-style bird feeder.

Rating
5 / 5
Likes
53
Downloads
161
Makes
2
Views
537
Reviews
2

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

An egg-shaped bird feeder model created using a Voronoi algorithm. The geometry is optimized to provide sufficient rigidity while maintaining an intricate, open structure. Four large circular openings (approx. 60 mm diameter) serve as the main entry points for birds.

Technical Specifications:

  • Dimensions: Height 180 mm, diameter 120 mm.

  • Construction: Single-part model with an integrated hanging loop.

  • Durability: The open-cell structure ensures excellent seed ventilation and rapid rainwater drainage.

Printing & Material Recommendations:

  • Material: PETG

  • Slicer Settings:

    • Layer Height: 0.2 mm.

    • Perimeters: Minimum 5 (for structural strength).

    • Infill: Use a modifier for the bottom tray – set to 20% Gyroid with 0 top/bottom layers and 0 perimetersto create a drainage mesh.

    • Supports: I used forced supports for the first 30 layers to ensure stability.



Model krmítka ve tvaru vejce vytvořený pomocí Voronoi algoritmu. Geometrie je upravena tak, aby poskytovala dostatečnou tuhost při zachování otevřené struktury. Čtyři velké kruhové otvory o průměru cca 60 mm slouží jako hlavní vletové otvory.

Technické specifikace:

  • Celkové rozměry: Výška 180 mm, průměr 120 mm.

  • Konstrukce: Jednodílný model s integrovaným závěsným okem.

  • Odolnost: Otevřená struktura zajišťuje ventilaci krmiva a rychlý odtok dešťové vody.

Doporučení pro tisk a materiál:

  • Materiál: PETG.

  • Nastavení sliceru:

    • Výška vrstvy: 0.2 mm.

    • Počet perimetrů: minimálně 5

    • Výplň: pro misku je nastaven gyroid 20%, bez perimetru a horni/dolni vrstvy

  • Podpory: Použil jsem vynucené podpory pro prvních 30 vrstev

Tags