DJ HDJ-X5BT-K Joint / hinge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 3d model of the joint of the Pioneer DJ HDJ-X5BT-K headset. Not perfect, but it fits and get your headset going again.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 138
- Makes
- 0
- Views
- 246
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial
So basically, the joint broke, and the headset was still perfectly working. got annoyed, reached out to Pioneer, and it was no help, so I took matters into my own hands.
This model took me a couple of weeks and a handful of iterations to get the small details.
The screws are meant to go into an M3 melt nut. And the hole for the screw is defined as follows
The bottom is kind of open, feel free to tape it or leave it, I personally left it like that
There are replacement parts for some of the pieces. I modeled one cylinder because the spring was a bit too annoying to put back, but it was a bit too tight, so be careful when trying to take it out after you put it in.
Buy me coffee: https://www.paypal.com/donate/?hosted_button_id=47N6Q2JQ5KM84