Reolink Doorbell 62mm spacer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spaced out enough to clear the brick.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 12
- Makes
- 0
- Views
- 111
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
It's unlikely that you have the same issue as me, but my previous nest's field of view was half brick, even with the angled spacer. So this is the 62mm spacer that I made to push the doorbell out beyond my ledge of brick so I can get the full view of the entryway.
It's 5mm smaller on the left side where it attaches to the wall (it made no sense to have it hanging over), lofting out to the size of the doorbell. My doorbell wires come from the brick, so there is also a cutout on the brick side to accommodate those wires. Apologies if you don't need it.
Cheers, eh?
Update: added step file in case you want to do away with the cutout or shrink it down.. Or really, whatever. You do you.
