Starlink Dishy v2 Winegard (1.5inch) bushing adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a bushing to allow me to mount my v2 Dishy into a 1.5 inch Bell / Winegard J mount that was left on my house
- Rating
- 5 / 5
- Likes
- 34
- Downloads
- 436
- Makes
- 3
- Views
- 2,446
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Public Domain
There's a lot of plastic at the bottom to give you the ability to put a bolt/screw through the bushing to hold it in the J Mount rotation wise. The top lip is slightly asymmetric to make it substantially easier to remove from the J mount tube. Printed in Prusament Black PETG.
Print upside down (lip on the bed), first 5ish layers (the lip) at 100% infill, then switching to 25% infill and 4+ perimeter layers for durability. Infill should only appear in the keyed area, the outer walls should be solid.
v2 Update: The cup would collect water when it rained, so I've added a weep hole at the base of the keyed area to allow collecting water to drain