Unistrut Multi-Solar Panel Clamps
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Enable multi-panel array with a remix of "Unistrut Solar Panel Clamp" by @thatbakerguy_715758.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 36
- Makes
- 0
- Views
- 189
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
Remix top retention portion to enable securing multiple panels on longer pieces of Unistrut rail. Bottom and single panel secure retention pieces originally by @thatbakerguy_715758.
Printed at 100% infill with rectilinear fill with 3D Fuel PCTG to secure three Callsun N-Type 16BB 200W Bifacial Solar Panel on 10 ft Unistrut rails anchored to the ground. Following three months of setup, no major issues so far. Depending to the permanency of the setup, may consider thread lock as bolts have loosened and required re-tightening.
Following original instructions:
"Uses a 3/8th's by 2 1/2in lag bolt, washer, split washer and matching nut. The nut is designed to be press fit n to the print with a vice or persuaded in with a hammer."
Not a fully engineer test / approved mounting solution and not recommended for commercial use, but works for my setup.