Mini Filament Pelletiser
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small model that perfectly and quickly cuts filament into 4mm lengths using a drill.
- Rating
- 4 / 5
- Likes
- 31
- Downloads
- 88
- Makes
- 2
- Views
- 593
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Small model that perfectly and quickly cuts filament into 4mm lengths using a drill.
Hardware:
608RS Bearing x2 (ID: 8mm, OD: 22mm W: 7mm)
8mm drill bit (not attached to model)
Print the model with the slot facing upwards. PLA should be fine, but I suggest ABS, ASA or stronger for long term use (e.g shredding >1kg of plastic)
I suggest using 4 walls and 20% rectilinear infill!
I have provided a .STEP file, which can be used in the majority of CAD softwares for modification and implementation into a larger system.
I used a reusable ziptie to keep the drill button pressed. double-sided Velcro tape also works.