Garden Hose Attachments
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These are a few accessories that I think can be useful, especially with my gutter downpipe water diverter.
- Rating
- 5 / 5
- Likes
- 1,607
- Downloads
- 2,442
- Makes
- 5
- Views
- 21,808
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
Although these are standalone accessories, they were created with my "Gutter Square Downpipe Diverter Twin Access" in mind :
https://www.printables.com/model/1637492-gutter-square-downpipe-diverter-twin-access
Parts Required To Purchase :
OD Outer Diameter
ID Inner Diameter
CS Cross Section ( Thickness )
Plumber's Tape Around Male Thread For Seal
https://www.amazon.co.uk/Plumbing-Teflon-Thread-Plumbers-Prevention/dp/B0G6D3M2VW/
O-Rings ....
OD16mm x ID11mm x CS2.5mm
https://www.amazon.co.uk/dp/B083GRDQ5M/
OD22mm x ID17.2mm x CS2.4mm
https://www.amazon.co.uk/dp/B07XFN81RH/
OD26mm x ID18mm x CS4.0mm
https://www.amazon.co.uk/dp/B0FCBQQKKJ/
Rubber Washers ....
½" Shower Hose Washer OD20mm x ID10mm x CS2.0mm
https://www.amazon.co.uk/dp/B0FJSCV6WN/
22mm Rubber Tap Washer OD24mm x ID13m x CS3.0mm
https://www.amazon.co.uk/Washer-Tap-Rings-Set-Appliances/dp/B0F8VQML9Q/
3D Printing Accessories :
M22 Thread Female To Quick Connector Male
1 x O-Ring OD16mm x ID11mm x CS2.5mm
1 x ½" Shower Hose Washer
M22 Make Inlet Cap
1 x O-Ring OD22mm x ID17.2mm x CS2.4mm
Use Plumber's Tape Around The Thread For Seal
M22 Thread Male ( No Nut ) To 22mm No Thread 50º
Use Plumber's Tape Around The Thread For Seal
M22 Thread Male To 22mm Straight
1 x O-Ring OD22mm x ID17.2mm x CS2.4mm
Use Plumber's Tape Around The Thread For Seal
M22 Thread Male To Quick Connector Male
1 x O-Ring OD16mm x ID11mm x CS2.5mm
1 x O-Ring OD22mm x ID17.2mm x CS2.4mm
Use Plumber's Tape Around The Thread For Seal
M22 Thread Male To M22 Thread Male
2 x O-Ring OD22mm x ID17.2mm x CS2.4mm
Use Plumber's Tape Around The Thread For Seal
M22 Thread Female Blanking Cap
1 x ½" Shower Hose Washer
M22 Thread Male Blanking Cap
1 x O-Ring OD22mm x ID17.2mm x CS2.4mm
Use Plumber's Tape Around The Thread For Seal
3D Printing Other Accessories :
GHM Thread Male Adaptor To M22 Thread Male Adaptor
M22 Side : 1 x O-Ring OD22mm x ID17.2mm x CS2.4mm
Use Plumber's Tape Around The Thread For Seal
GHT Thread Female To ½" BSP Thread Female Adaptor
BSP Side : 1 x 22mm Rubber Tap Washer ( OD24mm x ID13mm x CS3.0mm )
GHT Side : 1 x 22mm Rubber Tap Washer ( OD24mm x ID13mm x CS3.0mm )
Quick Connector Male To Quick Connector Male
2 x O-Ring OD16mm x ID11mm x CS2.5mm
If you need to connect two Quick Connect Female's, with a valve, then please see my version on this :
https://www.printables.com/model/1785375-garden-hose-valve-with-2-x-quick-connect-male