Open Lattice Ribbon Easter Egg 2026
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€6.25 – €7.64 net (excluding VAT)
For file: 2026 Open Lattice Ribbon Egg Whole_0.4n_0.15mm_PLA_COREONEL_8h14m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €6.94 excluding VAT (range midpoint).
- Weight reported by the author
- 60 g
- Print time reported by the author
- 8.23 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Nothing beats a beautiful diamond lattice design!
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 76
- Makes
- 0
- Views
- 178
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Spring & Easter
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This will print best using supports, but it doesn't need a lot. I recommend these settings:
Perimeters: 2
Infill: 15% Rectilinear (first 13mm) 15% Lightning (everywhere else)
Supports: 40 degree overhang using Organic supports
For extra bed adhesion, I set the supports' first layer expansion to 10mm.
I've included my PrusaSlicer project files and GCODE for a Prusa Core One L printer.