Easier-to-print frame for Air Purifier
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The upper and lower frames for the original Air purifier (BlueAir 411 filter) by madewhatnow are difficult to print…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 20
- Makes
- 0
- Views
- 197
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
The upper and lower frames for the original Air purifier (BlueAir 411 filter) by madewhatnow are difficult to print because of the long, steep overhangs and long bridges at the top.
This remix reduces the overhang to about 40 degrees and shortens the bridges. These two changes make the printing easier. Additionally, the height is tweaked by a couple mm so that one model serves as both the upper and lower frame.
Print two of these. This model replaces both the frame_upper and frame_lower models in the original thing.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
300
Infill:
20%
Filament: Overture PLA Matte Gray
Category: Other