1 / 3
Victron MPPT 75/10 stand
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
30 mm standoff for the victron mppt 75/10 solar controller for mounting in a plastic enclosure
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 43
- Makes
- 0
- Views
- 216
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
This is a standoff created for the Victron MPPT 75/10 charge controller. It is designed to provide 30 mm of standoff behind the heat sink of the controller and mounting in an enclosure. The "plate" is the portion that attaches to the enclosure with the provided screw holes. The 75/10 sits on top of the "legs" spaced to match the mounting hole pattern in the 75/10. Printing with PETG (or ABS) is recommended to be compatible with possible temperatures of the 75/10.