"𝚞𝚜𝚎 𝚠𝚘𝚛𝚔𝚏𝚕𝚘𝚠" Logo

Celebrate the "use workflow" directive and show your support of the open source Workflow DevKit.

The model is designed to be printed in multiple pieces and glued together. There are mortise and tenon joints with a small tolerance and draft angle to give you a good surface for glue to adhere to.

Print Suggestions

• Print the logo so that the front of the model is flat on the bed for the best quality surface.

• Add infill modifiers for the thin diagonal portions, and reinforce them with additional infill. The rest of the model can use 10% or even 5% infill.

• Paint seams onto the bottom of the logo where it will be glued onto the base, so that the seams won't be visible in the final result.

• Print the base as a separate job in a different color than the logo to add contrast (e.g. white and black), and then glue the parts together. I used superglue (cyanoacrylate). Lay it flat on a piece of paper as the glue dries.

• Taller layer lines (0.25mm or more) or larger nozzles should speed up your print and work fine here, as there are no fine details.

The included PrusaSlicer 3mf project file includes these suggestions.

CAD Model

A .step file is included, and you can find the full Onshape model here.

License

This file is listed here as under the Standard Digital File License, for lack of a better option.

This model is a derivative of the SVG logo file found at https://github.com/vercel/workflow/blob/main/docs/public/workflow.svg available under the Apache 2.0 license shown at https://github.com/vercel/workflow/blob/main/LICENSE.md.

In addition to the Standard Digital File License, you may also use these files under the terms of the Apache 2.0 license linked above.