5 Gallon Arrow Holder
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.12 – €1.37 net (excluding VAT)
For file: 5 Gallon Arrow Holder_0.2mm_PETG_MK3SMMU3_1h12m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.25 excluding VAT (range midpoint).
- Weight reported by the author
- 18 g
- Print time reported by the author
- 1.19 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Turn a 5 gallon bucket into a handy arrow holder.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 45
- Makes
- 0
- Views
- 280
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Open Community License v1
Top for a 5 gallon bucket to turn it into a handy arrow holder.
This model is one-fourth of the complete lid. After printing four of these, they can be glued together to make the complete lid.
This model uses the Height Range Modifier function to define the honeycomb infill and remove the top and bottom layers, exposing the infill.
The final model is not a tight fit on the top of the 5 gallon bucket. You may need to apply a little glue (E6000, or hot glue, or similar) at a couple spots around the edge to prevent the print from rotating.
Putting something soft at the bottom of the bucket makes things a little quieter when dropping in arrows, and is gentler on your arrow tips.