1 / 5
IKEA - maximera - strut - attachment (improved)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I've created a more stable version of the attachments to avoid the struts from sliping/bending.I have placed some…
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 13
- Makes
- 0
- Views
- 179
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
I've created a more stable version of the attachments to avoid the struts from sliping/bending. I have placed some rubber tape pieces (as you can see in the pictures) to keep them in place better (and it works very well). So the chaos in the drawer has ended :D
Notice: don't tighten the screws to much because the print won't last long.
You will also need:
- M3 x 25 mm screws
- M3 nuts
- some rubber tape
Print Settings
Printer:
Prusa i3
Rafts:
No
Supports:
No
Resolution:
0.25
Infill:
20%
Notes:
my settings for this are:
6 outlines
- 6 bottom-/toplayer
Category: Replacement Parts