1 / 2
Updated Luma P1 Rear Cover
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Luma P1 Rear Cover with extra space for the fan.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 37
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Based on the original models here,
I pushed the back out 0.8mm and left a cutout for the fan blades so they are much less likely to contact the back even if the plastic is pushed on or warps a little.
This DOES change the size and therefore the location of the camera by 0.8mm if it is mounted from that face.
We printed the real ones out of black PAHT-CF, but the photos show the prototype in PLA, which shows how the holes end up getting sliced and shows detail better with gray.