IKEA PAX hinge cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cover for an open PAX door hinge (if you have the tall doors and only use one of the middle hinges).
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 107
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Public Domain
Just use the 1.0mm version. The 0.6 doesn't have the same opacity and you can't even tell it's slimmer anyway when installed.
Due to slim walls, Arachne is best, but I have printed it ether way with success.
I printed mine with Polymaker white ASA, full solid or you can see through it.
Went through a few iterations, this is a very snug fit but still removable (2nd pic).
For those wondering why someone might want this, sometimes you want a drawer or shelf right where one of the middle hinges are, or you want to save five bucks (per door) and buy the three pack of hinges (for the shorter cabinets) instead of the four.
edit: added a slimmer version, 0.6mm pad vs 1mm. (increased internals 0.4mm to try to maintain opaque, at least with polymaker white asa)