Anycubic Kobra 3 Hotends - Modular Snap-Fit Wall Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Organize your workshop and protect your spare parts with this professional mounting system, specifically de
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 66
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Download here:
https://www.makeronline.com/en/user/personalInfo/dd565a79-10a5-4186-bbff-42fed784c7bf.html
Description
Organize your workshop and protect your spare parts with this professional mounting system, specifically designed for the Anycubic Kobra 3 generation hotends (Aluminum Block version). This design features a satisfying snap-fit locking mechanism to keep your hotends secure and ready for a quick swap.
🌟 Key Features
Secure Snap-Fit: The upper section acts as a flexible clip. Simply push the hotend in, and it locks into place, providing a firm hold that prevents it from falling out due to vibrations.
Lightweight & Stable: Optimized geometry for a minimalist, lightweight design that maintains maximum structural stability to hold your hotends safely over time.
Modular Design: Includes ready-to-print 3MF files for Single, Double, Triple, and Quad hotend configurations.
Dual Mounting Options:
Adhesive Version: Flat back for clean installation using double-sided tape (e.g., 3M VHB).
Screw Version: Pre-drilled for 2.5 x 13 mm wood screws, ideal for permanent installation on tool walls or enclosures.
Connector Safety: The vertical orientation ensures that the delicate heater and thermistor wires remain upright and tension-free.
🔍 Hotend Compatibility
This mount is specifically tailored for the standard Aluminum-Block Hotend assembly used in:
Anycubic Kobra 3
Anycubic Kobra 3 V2 / V2 Combo
Anycubic Kobra 3 Max
Anycubic Kobra S1
🖨 Print Settings
Material: Any material can be used. PLA+ (PLA Plus) or PETG is recommended for the best balance of strength and flexibility for the snap-fit mechanism.
Walls: Use 2-3 perimeters to ensure the clip arms are durable.
Infill: 10% (Gyroid recommended).
Supports: Supports are required for this print to ensure the best quality for the overhanging sections.
💬 Support & Feedback
If you have any questions, suggestions, or requests for modifications, please feel free to reach out in the comments section. I’m happy to help and open to improving the design based on your feedback!