Alfetta Sun Visor Hinge Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Alfetta Sun Visor Hinge Mount
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 29
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Public Domain
My 1979 Alfetta Sport Sedan's sun visors turned into dust.
I found something cheap and similar from a VW Bug.
They aren't perfect. I designed a "3D printable sun visor hinge mount." Print it with the flat side down. The two circular pieces are covers for the original mounting screws.
Pull the circlip from the Bug sun visors. Extract the spring. Pull the "L" shaped hinge from the visor's black hinge mount. Pull the "L" shaped hinge from the sun visor.
Use an adjustable wrench to press the metal "L" shaped hinge into the "3D printable sun visor hinge mount." Put the spring on the end. Insert a circlip.
The visor will be too short to reach the original, flimsy sun visor hanger. Pull down the rear view mirror and remove the flimsy hanger. Put the sun visor back up to conceal the exposed hardware and mount.
Print the third piece, a "3D printable sun visor support." It's meant to be mounted with an M6x1 flat head cap screw. The mounting hole is just a M6x1 rivet nut.
