V-Slot Clip-On Endcap Covers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I wanted to add Endcap covers to my Sphinx 55 build without using screws to hold them on. I only needed it for 2060.…
- Rating
- 4.667 / 5
- Likes
- 43
- Downloads
- 298
- Makes
- 3
- Views
- 1,174
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Update 1/8/2023
Someone asked for an option for 2 - V-slot 2060s side by side, so I added an option for 4060 & also a 4080 that will work for both 2x 2060 & 2x 2080. This openscad version is now Rev46 with 4 STL files for each option added. Of course you can also customize these more by adjusting the openscad variables further.
I wanted to add Endcap covers to my Sphinx 55 build without using screws to hold them on. I only needed it for 2060. Since these were similar to all the other V-Slots, I made it customizable for all the sizes. You can either use the thingiverse customizer, included STL files or download the openscad file & use that. I used the profile https://www.thingiverse.com/thing:2937519/ to start with for the exterior, but it was too tight with some PLA's I use. I ended up using this profile https://www.thingiverse.com/thing:940458 as a template for both the interior & exterior clips.
This will work with V-Slot 2020, 2040, 2060, 2080, C-Beam & 4040. I have only tested fit with 2020, 2040 & 2060. I was going to just make a clip for the interior cavities, but 2020 does not have that.
Category: 3D Printer Parts