Backplate Air Tag Holder for BST Metal Detectable Card Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Useful if you loose your card all the time and can't find it. Apple Air Tag slots right in. Slicer Settings are specific
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 24
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
NOTE: These apply specifically for 0.4 Nozzle with 0.20 Layer Height on Bambu Lab X Series printers. Ironing, bridges, support and fuzzy skin will most likely vary and are specific to Orca Slicer in some cases
Quality
Elephant foot compensation: 0.2 mm
Ironing type: All top surfaces
Ironing flow: 15 %
Ironing inset: 0.15 mm
Wall generator: Arachne
Walls printing order: Inner/Outer/Inner
Bridge flow ratio: 1.3
External Bridge density: 104 %
Speed
Outer wall: 100 mm/s
Support
Enable support: yes
Type: Normal (auto)
First layer density: 10 %
On build plate only: yes
Base pattern: Hollow
Base pattern spacing: 1 mm
Top interface layers: 0
Interface pattern: Grid
Top interface spacing: 1 mm
Bottom interface spacing: 2 mm