Bike Shoe SPD-SL Cleat Wall Mounting
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remixed tuna-fish's model to allow a more vertical orientation of the shoe. Also changed to 8x2mm magnets (optional)
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 17
- Makes
- 0
- Views
- 122
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Liked the original model concept of Tuna-fish (thankyou) but wasn't happy with the way the shoe stuck out at the heel. How the shoe sits in the holder is also dependant on the cleat position you use (for me my cleats are rearward maxed out).
Remix changed the shoe alignment, so the heel doesn't stick out so far. Removed top magnet position (interfered with cleat). Changed and realigned to 8x2mm magnets to allow shoe to rotated further into the holder. Will work without magnets but I found they do give a more positive retention of the shoe. Magnets fit quite firmly and should not need glue to stay in. I found it easiest to put the magnet on a flat steel surface (I use pliers see image) and then use that to push it into the hole.
2 STL versions- countersunk or Pan head screws for mounting.
I printed in PETG 0.2mm layers with an 0.4 nozzle. Suggest using some organic support - see image