Infinity - Template Set
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.64 – €0.78 net (excluding VAT)
For file: Templates_0.4n_0.2mm_PETG_COREONE_42m_bed3.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.71 excluding VAT (range midpoint).
- Weight reported by the author
- 10 g
- Print time reported by the author
- 41.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A set of templates for the Infinity wargame by Corvus Belli
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 44
- Makes
- 0
- Views
- 134
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Miniature Gaming Accessories
- License
- Creative Commons — Attribution — Share Alike
For the photos I used Prusament Transparent Neon Green PETG.
Blast/Smoke and Teardrop Templates for Infinity by Corvus Belli
120mm Round template
Large Teardrop template
Small Teardrop template
Blast Template Printing (for hex pattern and translucent filament)
I created this as 2 parts to let the slicer handle the creation of the hex pattern. The ‘Shell’ is actually solid geometry. Import both and when asked if you want it to be a single model with multiple parts, select Yes. You will then need to set the following setting for each part:
Shell
Perimeters: 2
Top Solid Layers: 0
Bottom Solid Layers: 0
Fill Density: 20%
Fill Pattern: Honeycomb
Length of Infill Anchor: 0
Numbers
Perimeters: 1
Top Solid Layers: 0
Bottom Solid Layers: 0
Fill Density: 100%
Fill Pattern: Aligned Rectilinear
Obviously You can print it however you want. I just think this looks really nice!
Teardrops
Perimeters: 2
Top Solid Layers: 0
Bottom Solid Layers: 0
Fill Density: 25%
Fill Pattern: Honeycomb
Infill - Extrusion Width: 0.9mm (double the default for thicker infill lines)