1 / 11
Voltmeter to alligator clip adapter.
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Voltmeter to alligator clip adapter.
- Rating
- 0 / 5
- Likes
- 22
- Downloads
- 22
- Makes
- 0
- Views
- 375
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Voltmeter to alligator clip adapter.
You will need thin conductor wire (I used jewelry wire), hot glue, a soldering iron, alligator clips, and wire.
Suitable for multimeters with a 2mm probe tip.
Smooth fit with 2 turns of conductor wire per hole. (Adjust the number of turns to the thickness of your conductor wire so the probe tip fits smoothly and makes contact.)
Assemble in the order shown in the photograph.
After soldering and joining the tubular pieces, fill the gap (where the wire is soldered to the wire) with hot glue and finish sealing everything.