Foretrex 301 data port cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My cover has broken after many years. I designed this to replace the old cover and it works like a charm.Unscrew the 4…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 25
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
My cover has broken after many years. I designed this to replace the old cover and it works like a charm.
Unscrew the 4 screws in the cover (T5) and remove the front. Unscrew the two Phillips 000 screws and remove the printboard. Remove the white sealant gunk around the remaining "stud" from the old cover.
Print the cover in flex filament. (I used 85A which worked like a charm, though a bitch to print.)
Place the cover in place with the new stud going into the hole and "click" it into place. Use som silicone sealant around the stud to make sure it is still waterproof.
Assemble in reverse.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK4
Rafts:
No
Supports:
No
Resolution:
0,2
Infill:
100%
Category: Gadgets