1 / 5
Rotating Face Clock
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple design for reusing standard clock mechanisms. The design is a mix astrolabe, sundial, old school clock gearing.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 10
- Makes
- 0
- Views
- 108
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
Model printed in pla, print speed 190m/s, 15% infill, 3 walls. Pretty Standard.
Bearings are 4mmI.D. and 10mmO.D. 4mm Deep.
Clock Mechanism is 57x57mm 17mm thick and the drive post is 18mm long.