2D Mario Wall Art (No AMS or ToolChanger needed)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mario wall art designed as a puzzle-style build. Each color is printed separately and assembled for a clean result.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 42
- Makes
- 0
- Views
- 217
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Full Description
This is a multi-part, multi-color wall art piece of Mario designed to be printed as individual color pieces and assembled like a children's puzzle. No AMS or multi-material system is needed. Just print each part in your chosen colors and fit them together for a clean look.
The pieces fit inside the border so no weird layered look.
The design focuses on tight tolerances for a precise, satisfying fit and sharp final appearance.
I Actually Printed the one in the photo in only Blue, Red, Black and White... the Boots, Buttons, Hair, and face were all printed in white and "painted" with acrylic felt pens.
Important Print Notes:
This model uses very tight tolerances (~0.1mm clearance)
Make sure your printer is well-tuned and capable of consistent dimensional accuracy
Elephant’s foot compensation is strongly recommended, too much first-layer squish can prevent parts from fitting together properly
If your parts feel tight, lightly cleaning edges or dialing back flow can help
Materials Tested:
PLA: Works great with standard tuning
ABS: Also works well if shrinkage is properly calibrated
If you’re unsure about your printer’s tolerance accuracy, I highly recommend running a calibration first. I personally use this model (v5) to dial things in:
https://www.printables.com/model/1113488-flexi-flow-calibration-tool-v4-by-ck3d