Cable protector for Toro PowerClear 721E snowblower
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Plastic cable protector for Toro PowerClear 721E snowblower. Protects the cable and the cable adjustment thingy.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 17
- Makes
- 0
- Views
- 241
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
Not long after I got my snowblower, the top of the plastic cable protector broke off. I designed a replacement protector with similar dimensions. The first time I tried printing, I did not have good adhesion and the print failed at the top. Using larger brim helps and recommend slowing the printer down to 50-75% when approaching the top of the print (i.e., after 2 hours). The original cable protector is domed, and thus needs to be printed with the dome at the top. Alternatively, I've provided a model with a flat top that can be printed upside down, with the flat top on the base. Either way you will likely need a brim.
You cannot print this lying horizontally. I tried with an octagonal version, but it was no good.
I used fuzzy skin in PrusaSlicer/Cura. I think it makes this look better.
Do not print this in PLA. TPU recommended, though I suspect PETG might be an OK choice.
Print settings:
- TPU
- Layer height, variable, 0.2mm
- Infill n/a (left at 20%)
- Brim, inner and outer 7mm
- Fuzzy skin option
Designed with OpenScad.