RBFB
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
RBFB (Round Bottom Flask B0ng)Round bottom flask water pipe stand / holder / caseVersion: v1.0.0This project is a…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 32
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- GNU General Public License v2.0
RBFB(Round Bottom Flask B0ng)
Round bottom flask water pipe stand / holder / case
Version: v1.0.0
This project is a custom-designed 3D-printed stand for securely holding a 500ml 2-neck round bottom flask, ideal for applications that require water filtration of smoke.
The stand is engineered to prevent the flask from tipping over, even when additional apparatuses are attached to the intake.
The stand consists of six printed parts:
***Top(x1):** Features a vertical hole for the intake and a round cutout to accommodate the slanted exhaust. ***Bottom(x1):** Includes a precisely designed relief to securely cradle the base of the round bottom flask. ***Legs(x4):** Connect the top and bottom sections, providing stability. These are fastened using M3 12mm bolts and M3 brass threaded inserts.
The design files include three STL files and are accompanied by FreeCAD files, allowing for easy customization and modification according to specific needs.
Post-Printing
Post-Printing
Support Removal
Remove supports if used
Assembly
Using a soldering iron, press the M3 threaded brass inserts into both the top and bottom of each leg(x4). Some sanding off of extruded plastic from both side may be necessary. The top and bottom of the legs sounds be smooth.
Start with feeding x4 M3 12mm bolts into the bottom bolt counter-bore holes. Screw on the legs until you feel a little resistance.
Repeat with the top; screw in bolts into leg inserts.
Be careful over tightening the bolts
Hardware
Hardware
Stand
Optional
- 4"-5.5" 18mm Downstem (No links (White Rhino in most smoke shops will work)) (1x)
- 90 Degree Vacuum/Gas Adapter (1x)
- 1/4" ID Silicone Tubing (1x)
Print Settings
Print Settings
***Top**
Supports: True(Probably could have no supports)
Inflill: 50%
Resolution: 0.2 ***Bottom**
Supports: False
Inflill: 50%
Resolution: 0.2 ***Legs**
Supports: False
Inflill: 25%
Resolution: 0.2
Category: 3D Printing