Toro 20321 Compatible Gas Cap (Part Number: 55-3575)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement gas cap for the Toro 20321 mower (Part #: 55-3575). It uses the internal parts from the original gas cap.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 24
- Makes
- 0
- Views
- 123
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
Replacement gas cap for the Toro 20321 mower (Part Number: 55-3575). It used the internal parts from the original gas cap.
Instructions:
Material: PETG (PLA will degrade over time with gasoline exposure)
Nozzle: 0.4mm
Layer Height: 0.15mm (it will allow the threads to print better)
Infill: 20%
Perimeters: 4
Assembly:
- Remove the internals from the old gas cap. Use pliers to pull the metal pin, then remove the paper gasket and plastic spacer. Keep all 3 parts.
- Place the plastic spacer in the same orientation as the original, then place the gasket and finally press the pin into the print.