1 / 1
STM32 Nucleo-64 Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A minimal, protective half-case for the STM32 Nucleo development boards.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 22
- Makes
- 0
- Views
- 123
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
To mount a Nucleo board to this only M3 screws are required.
The holes are 11mm deep, so with the Nucleo attached at maximum a M3x12 screw can be used.
M3x6 or M3x8 is probably already sufficient.