1 / 4
Nema 17 Bevel Gear Reduction 2:1 / 3/1 90 Degree Turn — image 1
1 / 4

Nema 17 Bevel Gear Reduction 2:1 / 3/1 90 Degree Turn

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Bevel Gear Reduction 2:1 90 Degree

Rating
0 / 5
Likes
6
Downloads
64
Makes
0
Views
265
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

My stepper motor was not providing enough torque for my project. Tuning my vref seemed insufficient and risky, so I made a step down converter to provide for power at 2:1 gear ratio.  (Update) 2:1 ratio was just not enough for my Recreator Fun Size, so I adjusted to 3:1 ratio and maybe it will work. 

3D model may not be perfect and require editing the step file. 

Make sure your printer can print tight tolerances. 

Lubricate gears with silicone oil. Do not use petroleum based oils for plastics. 

Materials I used (based on what I had available):

  • 1x 608 Bearing (2x recommended to support the shaft outside the gearbox) 

  • 4 M3 Screw 25mm

  • 4 M2 Countersunk Screw 10mm

  • 4 M3 Brass Insert 5mm

  • 4 M2 Brass Insert 3mm

  • Optional: 1x Brass extruder wheel from the Ender 3; Heat insert into the "Ender Brass Wheel Main Bevel Gear.                                                                                                                                                              - Alternatively you can just use the "Main Bevel Gear". 

Remixes Stepper Main Gear from Recreator 3d Fun Size

Update: Enlarged the teeth to make it more robust, and extended the large gear so no spacer is needed. 

Tags