Montessori Magnetic Fishing Puzzle for Kids
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This magnetic fishing game is a playful shape-matching toy designed for young children.
- Rating
- 0 / 5
- Likes
- 32
- Downloads
- 40
- Makes
- 0
- Views
- 363
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Puzzles & Brain-teasers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is one from my extensive Children's Toys Collection.
The set includes 7 different figures, each with its own unique shape. Children can use a magnetic fishing rod to catch the figures and then place them into their matching slots in the base.
Each figure contains magnets at the top and bottom inside the model. This allows the pieces to be easily picked up with the fishing rod while also helping guide them into the correct position when placing them into the base.
The game helps develop several important skills:
Fine motor skills
Hand–eye coordination
Shape recognition
Spatial awareness
Concentration and patience
The fishing mechanic makes the classic shape-sorting game more engaging, turning it into a fun and interactive challenge for children.
Depending on your print settings and magnet choice, the game can be adapted to your needs. For safety reasons, the toy should only be used under supervision, as magnets are not toys.
You will need 15 small neodymium magnets (Ø5 × 3 mm) and 7 larger magnets (Ø10 × 5 mm).
Printing information
All STL files are correctly aligned.
Nozzle: 0.4mm
Layer height: 0.2mm
Perimeter: 3
Infill: For most parts I recommend 10% Gyroid infill. Exception: Rod and MagnetHolder should be printed with 100% infill.
Support: none
Add a printing pause at the following layers to insert the magnets:
Base: Layer #38 (7.6 mm) – insert 7 magnets (Ø10 × 5 mm)
Figures: Layer #21 (4.2 mm) and Layer #193 (38.6 mm) – insert one magnet (Ø5 × 3 mm) each
MagnetHolder: Layer #21 (4.2 mm) – insert one magnet (Ø5 × 3 mm)
The base can be printed without MMU/AMS. The colored frames are optional, printed as separate parts, and can be inserted into the base after printing. If needed, they can be secured with a small drop of super glue.
I am looking forward to your Makes! :-)
If you like this design, feel free to check out my others here.