Votronic Standby Charger Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A quick release mount for the Votronic 12V Standby Charger
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 32
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A quick release mount for the Votronic 12V Standby Charger (https://www.12voltplanet.co.uk/votronic-12v-standby-charger-trickle-charger.html) allowing for easier installation and maintenance.
The charger is wired between leisure and starter batteries via an in-line switch to allow the solar feed to the leisure batteries of my campervan to keep the starter battery topped up when the van isn't used for a little while.
Printed with PETG as it requires flexibility and heat resistance. 0.4mm nozzle, 0.2mm layer height, 4 perimeters, supports needed for the clips. Stick to a suitable surface with VHB tape.
FreeCAD file included if you need to tweak anything.