Prusa Mini - Almost Centered Extruder remixed
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An improvement on Russell Bs "Almost Centered Extruder Mount". Less warping and easier mounting.
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 24
- Makes
- 2
- Views
- 172
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
This is a fix for uneven extrusion on the Prusa Minis X-axis, originally researched by Lajbror. My mount is based on the Remix made by Russell B, made originally because I had warping issues with his design.
The final version by me makes further improvements in a couple areas, first of all reducing the potential for warping, but also using less material, having better screw access, and cleaner cable routing. I have a prototype of this model mounted to my printer, so the pictures look a bit different to the current upload. But they both function exactly the same.
Please be aware that the cables going to the extruder are barely long enough to fit on this mod. While mounting the new extruder mount, move the gantry to the maximum Z-height and tie the cables down in such a way that they still have a bit of slack in Z.