SXT Carbon Scooter - Rear Fender/Break Replacement
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a printable replacement rear fender for the carbon scooter which is sold under many many different brands,…
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 63
- Makes
- 0
- Views
- 670
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Noncommercial
This is a printable replacement rear fender for the carbon scooter which is sold under many many different brands, here are just some of them:
- SXT Carbon Scooter
- Swagger Lightest Carbon Scooter
- MOMAS CARBON Electric Scooter
- Zero Carbon Scooter
- E-Scooter Land Glider Urban Scooter R50
- Ferrari Carbon Fiber Electric Scooter
- ICONBIT Smart Kick Scooter
- Carbon Fiber Luna Scooter
- Jack Hot Pro
- Nextdrive Carbon Scooter
- CarboAero Carbon Fiber Electric Scooter
An additional M2x40 with 2 washers and a nut is needed to be inserted in the hole. This gives additional stability around the mount of the fender since layer adhesion was not sufficient.
After printing the metal part from the original fender should be installed. I have not yet added these holes to model so currently these need to be done manually. Use the original screws.
Tip: Get the scooter cheap on AliExpress for below 300 dollars.
Print Settings
Printer:
Prusa i3 mk2
Rafts:
No
Supports:
Yes
Resolution:
0.15mm layer at 60mm/s
Infill:
100%
Notes:
Print laying on its side.
Category: Sport & Outdoors