Minolta AF-Sv Talker Lens Cap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A lens cap to fit Minolta Talker point and shoot camera from the 80s.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 11
- Makes
- 0
- Views
- 83
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I removed the threads/ridges of the 40.5mm cap and added a conical wedge to engage the lip around the lens of the Talker.
It works surprisingly well. I was surprised, anyway.
Printed at 0.15mm layer heights, no supports. Broke the parts free using the method from the original model.
Print without support. After print, place the cap with button towards a hard surface and push firmly until it snaps loose. Do the same for the other side. There's only a 0.3mm gap in the design so it will probably stick together somewhat. I've printed in 0.15mm PLA and PETG.