IPistBit 8" Screen 3U Bracket for 10-inch Rack
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
10" Rack Bracket for IPistBit 8" HDMI Display (HDMI + USB Touchscreen Interface)
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 21
- Makes
- 0
- Views
- 267
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
10" Rack Bracket for IPistBit 8" HDMI Display (HDMI + USB Touchscreen Interface)
Applies to the following products:
IPistBit 8" 1280×800 IPS HDMI Portable Touchscreen Monitor
Amazon
Aliexpress
Two types of profiles are available:
DeskPi RackMate (M5)
10" standard mini rack (M5/M6 and detachable Nut)
The following parts are required:
4 x [M2.5x8] Flat Head screws
You can buy a cheap M2.5 screw kit from Amazon or AliExpress.
IPistBit bundle screws have too small heads and short lengths, making them unsuitable for fixing brackets; flat head screws must be used.
Notice
On Bambu Lab A1 mini, each bracket needs to be printed one by one.
To reduce the use of support, the surface that is visible from the outside will be the top surface. If you want a smooth surface, use Ironing (Topmost Surface).
If you want to apply bed texture to the surface, rotate the model 180 degrees. However, many filaments are used as support.
ⓒ 2025 klayf (HONG-SIK WON)
For non-commercial and personal/in-corporate use only.
Models and prints may not be sold or used for commercial purposes.